Die vervaardiging van die isolasiebottel lyk eenvoudig, maar daar is baie skakels. Die nalatigheid van enige skakel kan die gebrek aan die voorkoms of funksie van die waterbottel/tuimelaar veroorsaak. In produksie vereis Ailin dat werkers streng standaardprosesse volg om te werk, en hul bes doen om die slaagsyfer te verbeter.
The thermal water bottle is composed of an inner tank, a vacuum layer and an outer shell. Different structures are manufactured by different processes and cooperate with each other.
Welding cup mouth
Sharpening & polishing
Painting & printing
Use a lathe, specifically in accordance with the “Instructions for Cutting Pipes”, which requires accurate dimensions, timely detection of defective products and waste materials, and avoid pits, pits, pits, and scrap products during operation.
The water expansion press shall be implemented according to the “Water Expansion Operation Instruction”, requiring concentration and always paying attention to whether the product’s pits, size, and shape meet the requirements.
Divide the tube
Use an instrument car to cut off the two shells that have swelled from one to the other. It is required to have accurate dimensions, uniform cuts, no gaps, and burrs. Handle with care to avoid pits, pits, pits, and scrapped products.
Cut the bottom
Use a lathe to cut the bottom of the shrunk shell to the standard size. The cut is uniform, without gaps, and burrs. Handle with care to avoid pits, pits, pits, and scrapped products.
Flat the mouth and the bottom
Use a lathe, the flat opening is even, without gaps, and burrs, which meets the requirements. Handle with care to avoid pits, pits, pitting, and scrapped products.
Use a special threading machine, specifically in accordance with the “Thread Rolling Operation Instructions”, requiring concentrated attention, adjusting the thread depth to meet the size requirements; handle with care to avoid pits, pits, pitting, and scrap products.
Rolling the mouth
Use a lathe to roll the protruding corner of the bulged liner to meet the size requirements, handle it with care, and avoid pits, pits, pitting, and scrapped products.
Washing and drying
Clean and dry the liner and shell; handle with care to avoid pits, pits, pitting, and scrapped products.
Knock on the recessed point
Check whether the inner tank and outer shell are qualified, and if there are pits and pits, knock them flat to meet the requirements, and handle them with care.
Weld the bottom of the inner to the inner tank
Welding mouth and bottom
Specifically, it shall be implemented in accordance with the “Operation Instructions for Welding Joint Welding Process”, and it is required to ensure that the bottom of welding joint is penetrated and smooth, without concave and convex points, welding tumors and missing solder joints.
The getter is spot welded on the midsole. Note that the getter on the spot welding must be vacuumed within 24 hours, otherwise it will be invalid.
Press the midsole: press the welded cup onto the midsole where the getter is spot welded, and the pressure is even with the bottom.
Tailless vacuuming, strictly in accordance with the vacuuming operation standard.
Specifically follow the “Operation Instructions for Electric Temperature Measurement Process”, check whether the cup is vacuum, and pick out the non-vacuum cup.
Send out the electrolysis to the external association, and the electrolysis in the cup is required to be bright and even, without watermarks and yellow spots.
The shell of the cup is required to be polished finely and the lines are orderly, the mouth of the cup is smooth and bright, and there should be no obvious drawing, scratches, black threads and pits, and residual polishing paste.
press the outsole on the polished cup to make it flat.
Spray paint or plastic spraying, pattern making and other processes on the embryo body.
Inflate the welded liner to test the water, and check whether there are any loopholes in the welding seam, and it is qualified if there is no leakage.
Put the liner and shell together, and make the cup mouth flat; handle with care to avoid pits, pits, pitting, and scrapped products.
Automatic shrinking machine
Mating welding machine
Temperature measuring machine